Quick answer
A dripping joint usually means a perished seal or a bracket that has shifted. Clean the joint and refix the bracket first. Reseal uPVC unions or cast-iron bolted joints if the material is sound, and replace sections that are cracked or rusted through.
How to spot a leaking joint
Water dripping from the gutter during rain in a spot that is not an outlet, a clean patch or a green streak on the wall below, or a damp patch on the ground. Dry weather gives the clue: a stained line leading down from one joint.
uPVC gutters
Modern uPVC joins at union brackets with a rubber seal. The seal can dry and shrink over time, or the gutter shifts on its clips so the gap opens. Cleaning the seal, repositioning the gutter and refitting the clip often cures it. A new seal or section is cheap.
Cast-iron gutters
Cast iron is bolted at the joints with a sealant between. When the sealant fails, the joint drips. The joint can be taken apart, cleaned and resealed. If the flanges are rusted or cracked, replace the section.
Check the fall
Gutters should slope gently towards the outlet. If a bracket has dropped, water sits in the gutter and finds the weakest point. Many apparent joint leaks are really a sagging run.
Silicone is a patch
A bead of sealant over a joint can buy time but does not fix the cause. Clean and dry the surface, and it will hold better. If it fails again, the fault is elsewhere.
When to call us
If you cannot see the joint from the ground, or the house is more than two storeys, get it looked at. WhatsApp photos for a free quote. Repairs are quoted individually.